Other cars with same bolt pattern - Scion XB Forum
User Tag List

Reply
 
LinkBack Thread Tools
post #1 of 42 (permalink) Old 07-04-2008, 10:55 PM Thread Starter
Senior Member
 
Join Date: Dec 2007
Posts: 2,202
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
(Thread Starter)
Default Other cars with same bolt pattern

As per TartanJack's request I have made this a sticky. Its a list of cars that have the same bolt pattern for those that might wanna get different steelie wheels. I have left out the trucks as they will not work due to the offset and design for RWD use.

5X114.3 Cars
Acura
Integra Type R (1997-2001) RSX (2002+)
CL (1998-2000) Legend (1991-1995)
TL 3.2 (1996+)
Chrysler
Caravan (1999-2003) LHS (1995-2003)
Chrysler Sebring (1995-2003)
Dodge
Stealth RS Turbo (1994-1996) Stratus (2002-2003)
Talon(1990-199 Avenger (1995-2003)
Ford
Ford Probe(1989-1997) Hub bore 59.6
Honda
Prelude (1997-2001) Honda CRV (1997-2003)
Civic Si Hatchback (2002+)
Infinity
Infinity I35 (2000-2003) Infinity I30 (1996-199
Infinity G35 (2004+)
Lexus
ES300 (1997-2003) GS300 (1993-2003)
GS400 (1998-2002) GS430 (1998-2003)
LS400 (1990-1994) IS300 (2000+)
Mazda
929 (1988-1994) 626 (1988+)
Protégé (2002+) Protégé 5 (2002+)
Mazda3 (2003+) MP3 (2002+)
Mazda6 (2003+) Mazda5 (2005+)
MX-6 (1988-1992) RX-7 GXL GTU Turbo II (1986-1992)
Mazda RX-7 (1993-1996)
Mitsubishi
Diamante (1991-1996) Eclipse (1989+)
Galant (1997+) 3000GT SL (1991-2000)
Lancer Evolution (2004+)
Nissan
Altima (2002+) Maxima (1989-2003)
240SX SE (1995-1997) 350Z (2004+)
Toyota
MR-2 (1990-1995) Supra (1986-1996) including Turbo
Camry Solara (1999-2003) Camry (1992+)
eviljack is offline  
Sponsored Links
Advertisement
 
post #2 of 42 (permalink) Old 07-04-2008, 11:43 PM
Royal Floor Sweeper
 
TartanJack's Avatar
 
Join Date: Jun 2008
Location: The Sticks, South Carolina
Posts: 4,312
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Re: Other cars with same bolt pattern

That would also include any stock rims on those vehicles, should one catch your fancy.

Traveller 3/ Spectre 3
Imperial Navy
337th Imperial Support Squadron
181st Imperial Fighter Group
Jolly Roger Detachment
501st Legion
_______
//__|___\___
[(+)____(+)_)

Tie CWT

"I don't eat nuts, I'm not a cannibal."

TartanJack is offline  
post #3 of 42 (permalink) Old 07-19-2008, 03:53 AM
gldnchld360
Guest
 
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Default Re: Other cars with same bolt pattern

Bookmarked!! Thanks for the info Jack's!
 
 
post #4 of 42 (permalink) Old 07-19-2008, 08:53 AM
Super Moderator
 
boblamb58's Avatar
 
Join Date: Nov 2007
Posts: 1,035
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Send a message via AIM to boblamb58 Send a message via Yahoo to boblamb58
Default Re: Other cars with same bolt pattern

OK, they say the dumb ones are those not asked..

What about offset? Having the holes line up correctly is only half the battle. What about how far the wheels stick in or out of the wheel well? What is the xB's offset?

Please fix these errors to view your results.
boblamb58 is offline  
post #5 of 42 (permalink) Old 07-19-2008, 12:39 PM Thread Starter
Senior Member
 
Join Date: Dec 2007
Posts: 2,202
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
(Thread Starter)
Default Re: Other cars with same bolt pattern

The xB's factory offest is +45. However you can run up to a +25 (depending on wheel design).

Oh and for those that don't understand offset here is a basic tutorial.

Offset is the distance that the mounting surface is located from the center of the vehical. Zero (0) offset means its in the dead center of the wheel. Plus (+) offsent is how far towards the outside of the wheel it sits. And Minus (-) is how far towards the inside the wheel it sits.
eviljack is offline  
post #6 of 42 (permalink) Old 07-19-2008, 02:55 PM
Senior Member
 
yanges's Avatar
 
Join Date: Oct 2007
Posts: 1,199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Send a message via AIM to yanges
Default Re: Other cars with same bolt pattern

Quote:
Originally Posted by eviljack
The xB's factory offest is +45. However you can run up to a +25 (depending on wheel design).

Oh and for those that don't understand offset here is a basic tutorial.

Offset is the distance that the mounting surface is located from the center of the vehical. Zero (0) offset means its in the dead center of the wheel. Plus (+) offsent is how far towards the outside of the wheel it sits. And Minus (-) is how far towards the inside the wheel it sits.
so, if i get a wheel w/ 42mm or 48mm offset, what is the difference as to how the wheel fits?

i am confused

yanges



pics here - use slideshow for best viewing http://picasaweb.google.com/home
yanges is offline  
post #7 of 42 (permalink) Old 07-19-2008, 06:11 PM Thread Starter
Senior Member
 
Join Date: Dec 2007
Posts: 2,202
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
(Thread Starter)
Default Re: Other cars with same bolt pattern

Ok if you get a wheel with 48mm offset then then the wheel will actually sit inside the wheel well more. If you get a 42mm offset it will stick out of the wheel well more. Ever seen the photos of my rims? They are a 25mm. However you have to realize that there is negative and posative offset. You won't see negative offset on FWD, they are usually for RWD. Well you might but they will be sticking way out of the car and need some major mods to clear. Quite honestly I don't know what kinds of cars run negative and which run posative any more. So many different wheel designs an cars out there and they aren't as universal as they used to be. Even RWD cars these days don't run similar wheels anymore due to changes in suspension design and larger disc brakes on the front and rear of cars.
eviljack is offline  
post #8 of 42 (permalink) Old 07-19-2008, 06:17 PM Thread Starter
Senior Member
 
Join Date: Dec 2007
Posts: 2,202
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
(Thread Starter)
Default Re: Other cars with same bolt pattern

Ok my last post may not have been clear enough so here goes again.

Picture a wheel. Look at it from side of the rim so you can see the front and back at the same time. Keep that image in mind.

Now think about when you put the wheels on your car. When you put the wheel on your car there is a flat part that touchs the rotors and keeps your wheel sitting flat. It has the center hole for lining up the wheels on the rotors and the five holes for the lugs to go through. We will call that the mounting plate.

Back to the image of your wheel. If the mounting plate were exactly in the dead center of the wheel, that would be zero (0) offset.
If the mounting plate were more towards the front of the wheel that would be posative (+) offset. If the mounting plate was more towards the rear of the wheel that would be negative (-) offset.

eviljack is offline  
post #9 of 42 (permalink) Old 07-19-2008, 06:17 PM
Royal Floor Sweeper
 
TartanJack's Avatar
 
Join Date: Jun 2008
Location: The Sticks, South Carolina
Posts: 4,312
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Default Re: Other cars with same bolt pattern

A 48 offset sets the wheel further into the wheel well. So, if you do that, don't get too wide of a rim or it might not clear on the inside of the wheel well.
(That would be a bad thing.)

I am fairly new to xBs (not quite 2 months), so I don't know the clearances or what are the width/offset limits. Thus, I can't give any advise.
48 isn't much more than 45 (3mm), so it might not be an issue. I just don't know.

Personal opinion:
With an stock offset of +45, I would go with a lower offset (number less than 45) long before I would go with a higher one. Many xB2 people run offsets in the 25-35 range and many between 30 and 35.
(Hey, I have read a bunch on these forums to learn more about that hunk of metal in my driveway . . . )
Therefore, between a 48 offset and a 42 offset (all else being even), I would probably get the 42 myself for a rim set (especially if it is significantly wider than the stock steelies).

Traveller 3/ Spectre 3
Imperial Navy
337th Imperial Support Squadron
181st Imperial Fighter Group
Jolly Roger Detachment
501st Legion
_______
//__|___\___
[(+)____(+)_)

Tie CWT

"I don't eat nuts, I'm not a cannibal."

TartanJack is offline  
post #10 of 42 (permalink) Old 07-19-2008, 06:43 PM
Senior Member
 
yanges's Avatar
 
Join Date: Oct 2007
Posts: 1,199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Send a message via AIM to yanges
Default Re: Other cars with same bolt pattern

so if i get a wheel that is 1" wider than stock @ 7.5" [18x7.5 ], you think the 42mm would make the wheel fit similarly to the way it does with the stock wheel @ 42mm offset?

Thanks!

yanges



pics here - use slideshow for best viewing http://picasaweb.google.com/home
yanges is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome