DJ_Moonbass

okay so i just built and installed my new fog light set up. and im curious is there a wire in that harness that is just a blank wire. no hooked up to anything that i could tap into that would basically be a wire i could use that is allready through the fire wall and can use it on the other side? does that make sense? because the LED fogs are grounded... and i have a long power wire that i need to run through the firewall then connect to my switch then to the secondary fuze box i have installed thats isolated and hooked to the battery. i would rather not run this wire through the firewall if i can help it. it would be much easier to use a wire from the fog light harness since thats not being used nor will it.

__________________
error 404. signature not found.

DJ_Moonbass

here are my fogs:



mounted them by machined recesed straigh slots in the billet grill so they face perfectly forward:



and i lit them up by attaching the wire straight to the battery:





so any help would be greatly appreciated. thanks.

__________________
error 404. signature not found.

evilcalvin

The US spec ones are. The wiring is taped up on the sides behind the plastic bumper cover and the plug end is taped WAY up behind the dash- just pull off the panel (where the pop-in switches sit) under the side between the wheel and door below the silver part.
There have been different reports for the wiring's presence or absence in JDM, Aussie, and CDN models.

quoteed by another member

__________________
Header*Stainless steel exhaust*Fiberglassed amp rack*Fiberglassed Dual 15" woofer box*True Cold Air Intake w/bumper vent*130 sq feet sound deadening*
JDM Springs 2.5" drop*Motegi FF7 17 lbs wheels
Ixos 0 gauge wire*2 Shuriken SKBT35's for 400 farads capacitance*HiVi 8" woofers in doors*Custom door panels
*MECP Certified *JL Audio Certified *Parrot Certified
I.A.S.C.A. Pro S.Q.I. Competitor

Chances are I might be able to help

Car domain page for my RS8

OC-SD Chapter of Scikotics