[autobotguy]

Hey there folks. I'm looking at a set of 18" Jeep Rubicon wheels for sale locally and they look like they might work for my 2012 XB. The wheels stats are as follows:
18x7 et45
71.5 center bore

My Xb is lowered on K-Sport springs with the fronts cut 80% of one coil . This basically drops the car to DF210 stats.

It looks like with 205/40R18 tires will have a baby stretch and with a 10mm spacer it will be flush without intruding on the suspension side of things. Do you guys think this will work or is even correct??? I'd greatly appreciate any assistance from some experienced folks on here. Thanks!!!

 

[5zero4]

That will look interesting 😏


Sent from AutoGuide.com App

 

[autobotguy]

Already photo-shopped a set on my XB...

 

[TartanJack]

Those remind me of the now-standard Hot Wheels wheels:

 

[5zero4]

I thought you were talking about these. http://i.imgur.com/bM3QiPw.jpg


Sent from AutoGuide.com App

 

[Greg S]

I've always thought those would look good on a 2nd gen. The bolt pattern is right, you'll need hub centric rings. At only 7" wide I would go with a 15mm spacer up front and 25 in the rear to even them out.