Scion XB Forum banner
1 - 8 of 8 Posts

·
Royal Floor Sweeper
Joined
·
4,314 Posts
You will need:
Headlamps
Bumper cover, inc. all grills and inserts
Foam very low-speed bumper, that goes between the cover and the actual, steel bumper.

Everything mounts pretty easy and the switch has been done numerous times.
 

·
Registered
Joined
·
1,033 Posts
As far as I know, the headlights are different, but other than that it should work.
2008-2010 have a single white marker lamp inboard of the headlight on each side for signaling turns and for clearance at night. 2011-present have two separate lamps (amber for turns, white for clearance). Not sure if the physical shape of the headlamps are different.

I know the hoods from 2008-2010 and 2011-present are interchangeable.

Agree with TartanJack that the foam backing pads are different.

To see what else has changed:
https://sites.google.com/site/brickpigs2011xb/home/what-changed-2010-2011
 

·
Registered
Joined
·
457 Posts
Tyler, just hit one of the junkyards in Sun Valley or order the foam on ebay, it'll be stupidly expensive at Frontier. I think you'll probably need to replace the headlight to fit the bumper cover correctly. We can compare front ends at the next meet to make sure.
 

·
Premium Member
Joined
·
709 Posts
Ok why is it you all wanna do such? Swap front ends. Whats the gain?
In my opinion.. the upper grill looks better with the inset emblem im the 11+, so I could see the want in it, but for me thats to much money to swap for something so small :p.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top