Scion XB Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Seeing another post on if you can change the bulbs on DRL's (LED's) make's me wonder if they would bolt up to my 2012?? I priced them out and for the set up it is $185 for the set. Obviously I will have to wire them. Toyota didn't have a separate mounting bracket.... Has anyone done this themselves?? Did the process go smoothly??

:cheers:
 

·
Registered
Joined
·
48 Posts
I did them on my 2012 Hot lava, the mounting brackets are build into the housing & they snap into the bumper < replacing the fake brake ducts >. The wiring in the hardest part because of the connection on the back of the led's & "toyota" recommends on having a relay & ballast for the led's life span... I got a harness off a 2012 camry with the optional DRL led's & used that has my harness & switch.
On the 2013 the harness to the led's is build into the chassis harness of the vehicle.
 

·
Registered
Joined
·
24 Posts
Discussion Starter · #3 ·
....The wiring in the hardest part because of the connection on the back of the led's & "toyota" recommends on having a relay & ballast for the led's life span... I got a harness off a 2012 camry with the optional DRL led's & used that has my harness & switch.
On the 2013 the harness to the led's is build into the chassis harness of the vehicle.
Did you order the parts from Toyota or did you get them at a salvage yard?

The which harness did you pull off of that Camry? And the switch, do you mean the blinker part to turn on the headlights?? Sorry for the bonehead questions. I want to get the correct parts and understand you correctly. :) The wiring does sound like a pain in the ###. Any other tips or advise on the install?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top