Picked these up from FastScions. Install took about 2 hours, with lots of drilling, cutting, and filing. They are wired to run as DRLs. The light output is much better than I expected, so far pretty stoked.
Not so much. You have to drill two 1/4" holes to mount each one. The top of the bumper vents need to be cut/filed to make room for the LED housing. Then you need to cut about 1 1/2" off the top of the vent covers. Not to mention wire everything.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.