Scion XB Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
845 Posts
Look up some videos on youtube. It will answer a lot of your questions. Get a friend to help you and set up planks on milk crates either side of the car to get at a better working level. Use squeegees with the soft side of velcro stuck on the edge. Make a template out of paper to go around the antenna. Once you get it perfect, trace it onto the paper side of the vinyl and cut it out with an exacto. Make sure you get it centered and allow enough room to handle the vinyl around the edges. Other than that, work from the middle out and take your time. If you get a crease or bubble just lift the vinyl, warm it with a hairdryer and the crease will go away.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top