Connecting the backup camera to a Pioneer Deck?

10399 Views 7 Replies 4 Participants Last post by jbarker83, Jun 2, 2014

Sapphire

Discussion Starter · Dec 11, 2013

Hi all, I recently got the Pioneer AppRadio 3 DA-210 deck for me 2008XB. Now I wonder how to hook up the backup camera.

I already bought the camera that will goes to replace one of the plate lights.

But where do I get the backup signal to tell the deck to switch to the camera when I shift to reverse?

I did a search can't find anything.

Thanks,

Save

1 - 2 of 8 Posts

Paul1114

· #5 · Jan 20, 2014 (Edited)

Edit: 1 sec I got this, uploading a pic

Save

Paul1114

· #6 · Jan 20, 2014

Look for the green wire on that connector under the bottom left of the dash. Use a splice (as in the instructions) to run a REV wire to the back of the head unit. This is from the OEM NAV installation instructions, so basically do the bottom picture, then run it up to your head unit like in the top picture. This should work. Let me know if you have any problems and I can dig up another source if needed.

See less See more

Save

1 - 2 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month