[miloxb]

Hey guys going in for an alignment and thought about modding the exhaust a little bit but had a question. Which would sound/perform better

Replacing scuba with high flow res
Replacing scuba with straight pipe
Or leave scuba and replace rear muffler with straight pipe and new tip? Thanks for the input!


Sent from AutoGuide.com Free App

 

[Chance12XB]

Other. Replace scuba with glass pack!

 

[Chris-Garage]

Other. Replace scuba with glass pack!

+1
i have a glasspack and tsudo axle back

 

[miloxb]

Any particular glass packs you recommend? Looking for a low rumble not high or raspy!


Sent from AutoGuide.com Free App

 

[Chris-Garage]

Any particular glass packs you recommend? Looking for a low rumble not high or raspy!


Sent from AutoGuide.com Free App

for a rumble you will need to get a axle back exhaust. when i had glasspack and oem axle back it was a bit raspy after 3500rpm. with glasspack and tsudo axleback it is a bit raspy at 4500rpm but on low rpms it has a nice tone

 

[Chris-Garage]

i recommend you go with scuba delete so it can be a bolt on setup if you dont like it you can go back to stock with no problems. glasspack has to be welded so they will cut the stock res/scuba