Scion XB Forum banner
1 - 14 of 14 Posts

·
Premium Member
2011 Scion xB Release Series 8.0 SoundWave
Joined
·
746 Posts
Discussion Starter · #1 ·
$500 shipped!!

I am selling my custom made Fiberglass subwoofer enclosure with New Kicker Solo-Baric 12" Dual 2 ohm L7 2011 model with Grille; S12L72 (11S12L72) This woofer is almost new. Hows that? I had it replaced by Kicker in November and it is in excellent condition. I also have the factory packing as I always keep that stuff.




This box was made by me, I have numerous references and recommendations and have been building fiberglass boxes professionally for over 16 yrs. This is a 1 off build so you will be hard pressed to find a fiberglass box for a L7 anywhere.

As you can see above there is plenty of trunk left after installing this. I will test fit this in a fellow Scikotics toaster in the next few days to verify it fits with stock trunks.
Below you can see the high gauge terminals on the box and the fit is nice. Yes thats Frog face Fleece, they were out of Care Bears and My Little Unicorn fleece.



Here is a link to where I got it:
Kicker 11S12L72 (11S12L7-2) 12" Dual 2 ohm Solo-Baric L7 Subwoofer
 

·
Premium Member
2011 Scion xB Release Series 8.0 SoundWave
Joined
·
746 Posts
Discussion Starter · #2 ·
Why am I selling this? I am going up, way up. Up to 4 12" Kicker Comp's. Not getting any younger and I always wanted to be deeper.
 

·
Premium Member
Joined
·
271 Posts
Dude if you will ship out to aus consider it sold...
 

·
Registered
Joined
·
658 Posts
No worries. I'm in the process of getting rid of a lot of debt so I shouldn't be spending the money anyway. Any other time and this would be mine. PM me a quote on building me the same one for future reference if you don't mind.
 

·
Registered
Joined
·
976 Posts
Does that fasten to the vehicle or does it just wedge itself in there?
 

·
Premium Member
2011 Scion xB Release Series 8.0 SoundWave
Joined
·
746 Posts
Discussion Starter · #11 ·
Making a mount would be a hole for the chrome hooks
 

·
Registered
Joined
·
254 Posts
I have a Kicker L5. couple questions:

-would my L5 fit this box?
-can you access the spare with this in place?
-would you be willing to just sell the box?

My L5 is in a big ported box and I've always wanted a custom box in the space in the back, but if it reduces sound quality or doesn't save me a ton of space I dunno if I'd want one.
 

·
Premium Member
2011 Scion xB Release Series 8.0 SoundWave
Joined
·
746 Posts
Discussion Starter · #13 ·
I have a Kicker L5. couple questions:

-would my L5 fit this box?
-can you access the spare with this in place?
-would you be willing to just sell the box?

My L5 is in a big ported box and I've always wanted a custom box in the space in the back, but if it reduces sound quality or doesn't save me a ton of space I dunno if I'd want one.
I would sell the box for $300 with shipping.
According to Kicker they have the same cutout which is 11 1/16" by 11 1/16
As for the fit, in order for the box to go in the tray has to be either removed or altered. I may make a refit to the box to see about making a simple drop in.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top