[psyionXb]

So I decided to get a new head unit, but didn't want to spend a ton. Best Buy has the Pioneer AVH-2300DVD on sale right now for $350, so I got it over the Kenwood that was $375. Got the Pioneer because you can add satellite, bluetooth, HD radio and navigation. Also got a box with two 10 inch Rockford Fosgate subs and an 800 watt amp. Very happy with all and the Pioneer fits great and makes for a nice finish, I recommend it. Make sure you also install a bypass switch so you can watch DVDs while the car is in drive. Here are a few pics.

 

[phobic]

I used to have the 3200 model, then upgraded to the 4200 model. such an awesome headunit.

 

[Dzey]

Does the steering wheel control and the console aux/usb still works with this or you need to purchase stuff for it to work?

 

[phobic]

you need to get stuff so the steering wheel controls work, and the console aux prob doesnt work but if you were savy you could wire it, it would be a lot of work though.

 

[Dzey]

Bummer that kills it for me. I really want the wheel control and the aux/usb on the center console to work. This head unit is on sale at best buy fro 249.99$ right now

 

[phobic]

the steering wheel controls are easy, that's just a separate box to wire in, but the aux is tough.

I removed my aux setup and just have an LED shut off and on switch there now.

 

[Dzey]

So for the steering control I don't need to buy any special wires etc? I can live w/o the aux/usb also does this hu uses standard ipod/iphone usb cable to work? I saw a different cable usb and aux together do I need to use that?

 

[phobic]

I just use a straight ipod cable going right to the USB on the head unit.

you need something like this: http://www.amazon.com/Swi-ps-Pioneer-Universal-Steering-Interface/dp/B000AXW7SA

that's not exactly what you need, but you'll need to wire something like that in to keep steering wheel controls. mine work just fine. I had a pro do the install.

 

[Dzey]

How much did the cable cost for the steering wheel control?

 

[phobic]

I think the one I got was like 30 bucks. it was pretty cheap.

 

[Dzey]

Oh ok. Does the hu sits flush on the dashboard or I would need a mount?

 

[BrickPig]

Does the hu sits flush on the dashboard or I would need a mount?

Look at the first picture contained in the very first message of this thread. The Scion head unit is a bit wider than a double DIN head unit by about 3/8" on each side. So you will need some kind of kit to mount an aftermarket double DIN head unit into the dash, if for no other reason, to fill in the gaps. (Someone jump in and say something if I'm mistaken.)

 

[JayxB]

Look at the first picture contained in the very first message of this thread. The Scion head unit is a bit wider than a double DIN head unit by about 3/8" on each side. So you will need some kind of kit to mount an aftermarket double DIN head unit into the dash, if for no other reason, to fill in the gaps. (Someone jump in and say something if I'm mistaken.)

BrickPig is right, My xB came with the Pioneer Special head unit since it was the RS, and when I installed my subs there is a plastic bracket that attaches to the sides to make the double din look flush. If you want I can post some pics of what it looks like after I get home from work tomorrow.

 

[phobic]

yup, my double din unit needed a mounting kit, it's not uncommon.

 

[mrpep]

I have the same unit and you will need a mounting kit which will mainly cover the sides so there's no gap - this unit is sweet and user friendly- enjoy!