Scion XB Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
614 Posts
They blink quickly because the LED is not as much of a load for the OEM flasher, so it blinks fast. There is two ways to fix the Hyper Flash, one is to replace the Flasher with one made for LEDs so it will flash at the normal rate, but the lights won't flash anymore when using your remote entry. The second way is to install load resistors to the turn signal circuits. This way isn't as easy as just swapping out the flasher, but it is still an easy install and your lights will still flash with the remote entry.

Here is a picture of my load resistors and mounting plates. I bought them also at V-Leds.

 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top