Scion XB Forum banner
1 - 13 of 13 Posts

· Premium Member
Joined
·
284 Posts
Discussion Starter · #1 ·
Hey guys, i have been looking through various threads and been asking some fellow members and i have heard some good comments regarding the tanabe springs, mainly the nf210's and the df210's..

if some of you guys are running these esp with 19" wheels would you mind posting up some pics? im going towards the df210's for a lower stance but at the same time i don't want to have any issues with scrubbing, speedbumps etc, any input would be greatly appreciated. thanks. :flex:
 

· Registered
Joined
·
243 Posts
are you running 19s now? i run 17s on nf210 with no issues. i've read alot of guys running 18s on df210 with no issues. some guys running 19s go the coilover route. i'm pretty sure someone here will chirp-in running df210 w/19s.
 

· Registered
Joined
·
39 Posts
I went pedders on mine. $650 fitted.

They have a pict on website of its stance, plus i have mine in my hello thread
 

· Premium Member
Joined
·
284 Posts
Discussion Starter · #4 ·
are you running 19s now? i run 17s on nf210 with no issues. i've read alot of guys running 18s on df210 with no issues. some guys running 19s go the coilover route. i'm pretty sure someone here will chirp-in running df210 w/19s.
yes im running 19s now, if i have to roll the guards in order to have these i think i would rather go the nf range, but obviously i want the lower stance lol
I went pedders on mine. $650 fitted.

They have a pict on website of its stance, plus i have mine in my hello thread
ill try find it also
 

· Registered
Joined
·
279 Posts
There is rubbing when I hit good holes or make a turn to fast and no no rolling fenders nothin. I am goin to be upgrading my shocks to tokiko hp blues tho when the stock ones go out.. But for the most part I love the ride not bouncy and all... Oh!!! Make sure to cute ur bump stop in half when u hang the springs cuz if not ull bottom out faster
 

· Premium Member
Joined
·
284 Posts
Discussion Starter · #8 ·
There is rubbing when I hit good holes or make a turn to fast and no no rolling fenders nothin. I am goin to be upgrading my shocks to tokiko hp blues tho when the stock ones go out.. But for the most part I love the ride not bouncy and all... Oh!!! Make sure to cute ur bump stop in half when u hang the springs cuz if not ull bottom out faster
mmm, that's what i thought.. which is why i might have to go with the nf range, my e36 bmw used to scrub everywhere, i don't want the same issues with my new rukus, i basically want to get it as low as possible with no scrub
 

· Registered
Joined
·
782 Posts
Hey guys, i have been looking through various threads and been asking some fellow members and i have heard some good comments regarding the tanabe springs, mainly the nf210's and the df210's..

if some of you guys are running these esp with 19" wheels would you mind posting up some pics? im going towards the df210's for a lower stance but at the same time i don't want to have any issues with scrubbing, speedbumps etc, any input would be greatly appreciated. thanks. :flex:
If you have to deal with speed bumps or curb entrances to parking lorts or driveways (or pot holes), then I suggest avoiding a deep drop (as in DF). Even a moderate drop (NF or my Eibach Prokit for example) requires a little care at times.
 

· Premium Member
Joined
·
284 Posts
Discussion Starter · #11 ·
Ya nf would be the way to go from what I was told it levels the car out and it has a way better ride than stock....... Hey if u ever take ur rukus badge off let me know I'd love to take it off ur hands
Yeah, i might try the nf's they seem to be the go, im running 19's so hopefully they tie in most of the wheel gaps, as for the badge pm me.. can work something out

If you have to deal with speed bumps or curb entrances to parking lorts or driveways (or pot holes), then I suggest avoiding a deep drop (as in DF). Even a moderate drop (NF or my Eibach Prokit for example) requires a little care at times.
yeah, the road i take every day to work is a mess, ill buy the nf's and see how i go, i don't want to be on the floor, but enough to even it out and bring in the gaps.. this is it stock springs





 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top